Xerox DocuPrint 3055 User Manual page 103

Setting Item
Port Status Sets whether to enable or disable the parallel port at printer start-up.
• [Enable] (default)
• [Disable]
Note
• After changing this setting, reboot the printer.
Print Mode Sets the method of processing data (print language).
• [Auto] (default)
• [ESC/P], [PDF], [PS], [PCL]
• [HexDump]
Note
• [PS] appears only when the PostScript software kit (optional) is installed.
Adobe Protocol Sets the PostScript communication protocol.
• [Auto]
• [Standard]
• [BCP]
• [TBCP] (default)
• [Binary]
Note
• [Adobe Protocol] appears only when the PostScript software kit (optional) is
• Select an appropriate option according to the data format specified on your
• [Adobe Protocol] is valid only when printing in PostScript.
• After changing this setting, reboot the printer.
Bi-directional Sets whether to enable bi-directional parallel communication (IEEE1284).
• [Enable] (default)
• [Disable]
Note
• After changing this setting, reboot the printer.
After receiving data from a computer, the printer automatically detects its
print language and processes the data accordingly. (See *1 on P. 132.)
After receiving data from a computer, the printer processes the data with the
selected print language.
Allows you to view data received from a computer by printing it in ASCII
codes (hexadecimal format). (See *3 on P. 132.)
Automatically detects the PostScript communication protocol.
Select this when the communication protocol is in ASCII format.
Select this when the communication protocol is in binary format.
Select this when the communication protocol are both in ASCII and binary
formats and switches between the two using control codes.
Select this when no special processing is required for data.
installed.
print driver.
Description
5.2 Setting the Common Menus
103