Xerox DocuPrint 3055 User Manual page 59

4. From [Paper Type], select [Transparency].
Note
• The paper type selected here is only valid for this job. This setting does not change the paper type
setting on the control panel.
5. From [Paper Size], select the size of the document to be printed.
6. Click the [Layout] tab, and select the size of the output paper from [Output Size].
7. Click [OK] to close the [Printing Preferences] dialog box.
8. Click [Print] in the [Print] dialog box to start printing.
Automatically Printing by Changing the Paper Type Setting
When the paper types of the trays are set correctly on the control panel, you can request a
job without specifying a paper tray on the print driver. The printer can automatically select
a paper tray based on the paper type you selected on the print driver.
This method allows you to request a print job without being conscious about the type of
paper loaded in each paper tray.
Before requesting a print job from your print driver, set the paper type of the tray on the
control panel.
Refer to
• For information on how to set the paper type setting on the control panel, refer to " Paper Sizes/ Paper
Types of the Trays" (P. 88) and " [Paper Type]" (P. 125).
1. On the [File] menu, click [Print].
2. Select the printer from the [Select Printer] list, and click [Preferences].
3.5 Printing by Changing the Paper Types of the Trays
59