Xerox DocuPrint 3055 User Manual page 99

Setting Item
Quantity Sets the print quantity.
• [1 Set (s)] to [999 Set (s)] (default: [1 Set (s)])
Note
• Depending on the protocol used for file transmission, the value specified on
2 Sided Print Sets whether to enable 2-sided printing.
• [1 Sided] (default)
• [Long Edge Flip]
• [Short Edge Flip]
Note
• [2 Sided Print] appears only when the duplex unit (optional) is installed.
Print Mode Sets the print mode to one of the followings:
• [Normal] (default)
• [High Quality]
• [High Speed]
Password Before printing a password-locked PDF, set the password here. The file will be
printed only if its password matches the password you set here.
The password can be up to 32 alphanumeric characters.
(See *4 No.1, 2, 3, 4 on P. 132.)
Collated Sets whether to collate multiple-set documents. (1, 2, 3..., 1, 2, 3...)
• [Off] (default)
• [On]
Output Size Sets the output paper size.
• [Auto]
• [A4] or [8.5 x 11] (default)
the protocol may override the [Quantity] setting.
Disables 2-sided printing.
Prints on both sides of paper so that the finished document opens like a
book.
Prints on both sides of paper so that the finished document opens like a
calendar.
Prints documents at standard speed with standard image quality.
Produces higher image quality than [Normal], but at a lower print speed.
Prints documents at a higher speed than [Normal].
Automatically determines the output size based on the size and settings of
your PDF file.
Displays either [A4] or [8.5 x 11] depending on the option selected under
[Admin Menu] > [Printer Settings] > [Default Paper Size].
Description
5.2 Setting the Common Menus
99