Power Saver Modes - Xerox DocuPrint C525 A User Manual

1.3

Power Saver Modes

This printer is equipped with the power saver mode 1 and the power saver mode 2 to reduce
power consumption when it is left idle.
When no print data is received for 3 minutes, the printer will enter the power saver mode 1.
When no data is received for a further 5 minutes, it will enter the power saver mode 2 by
default.
When the printer enters power saver mode 1, the screen on the control panel becomes dark
and "Ready/Standby" is displayed.
When the printer enters power saver mode 2, only the <Power Saver> indicator lights; all
the other indicators go out. The display also goes out, and nothing is displayed. The time
ranges to specify for the printer to go into the power saver mode 1 or the power saver mode
2 are 1 to 60 minutes or 1 to 120 minutes, respectively. Consumption of power during the
power saver mode 2 is 7 W or less (for AC 110 - 127 V) or 9 W or less (for AC 220 - 240 V)
and the time required to exit from the power saver mode 2 to a print-ready status is about
39 seconds.
Note
• You can specify for the printer not to go into the power saver mode 2.
• For details on the power saver mode and the procedure to change the settings, refer to "Basic
Operations (Example: Changing the Power Saver Timer)" (P. 35).
Exiting the Power Saver Mode
The printer automatically cancels the power saver mode once it receives data from the
computer.
To cancel the power saver mode 1 or the power saver mode 2 manually, press any button
on the control panel or press the <Power Saver> button, respectively.
Note
• Opening and closing the cover automatically exits power saver mode 1 also.
17
1.3 Power Saver Modes