RAID Function
1.
Boot your system. If this is the first time you have booted with the drives
attached to RAID connectors, the onboard BIOS will display the following
screen.
MBFastTrak133 Lite (tm) BIOS Version 2.00.0.XX
(c) 1995-2000 Promise Technology, Inc. All Rights Reserved.
No array defined . . .
Press <Ctrl-F> to enter FastBuild (tm) Utility
Or press <ESC> key to continue booting the system.
2.
Press <Ctrl-F> keys to display the FastBuild (tm) Utility Main Menu
3.
Press "1" to display the Auto Setup Menu below. This is the fastest and
easiest method to creating your first array.
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Optimize Array for:
Typical Application usage:
Mode ..........................................Stripe
Drives used in Array.......................... 2
Array Disk Capacity .................. 16126
[ ] Up [ ] Down
2-2-1 Creating an Array for Performance
NOTE: RAID Function allows users to create striped arrays with 1, 2 drives.
To create an array for best performance, follow these steps:
1.
Using the Spacebar, choose "Performance" under the Optimize Array
for section.
[Auto Setup Options Menu]
Performance
A/V Editing
[ Auto Setup Configuration ]
[ Keys Available ]
[ ,
, Space] Change Option
8
[ESC] Exit
[Ctrl-Y] Save
Need help?
Do you have a question about the Promise RAID Function and is the answer not in the manual?