Using The FastCheck Monitoring Utility
Selecting Notification Options
This section of the Options windows allows users to select how they are notified of a
system event. A System Event includes driver-initiated Rebuilds user-initiated manual
Rebuilds or manual Synchronization, and Error-Handling reporting for these processes.
Enable audible prompt checkbox turns on/off an audible alarm of an event (typically
a drive failure, or completion of rebuild or synchronization).
Popup message box checkbox turns on/off the appearance of an event message box
that would typically indicates a drive failure, or completion of rebuild or
synchronization.
Use log file checkbox allows writing operating event logs of the array activity (alerts
and status reports) to a given file name and directory. If a file name is used but
the path left blank, the default directory is the same as the FastCheck Utility
(typically C:\Program Files\Promise\MBFastTrak133 Lite).
Use NT system event log checkbox is greyed out under Windows
95/98/2000/Millennium automatically. Under Windows NT4, it permits user to
write array logging to NT's own event log.
1. To view FastCheck events under Windows NT, go to
Start/Programs/Adminstrative Tools/Event Viewer.
2. In the Event Viewer, choose "Log" from the menu bar, then check
"Application." Any events generated by FastCheck will appear under the
Source column as "FastCheck."
On Errors section offers four radio button choices for the user to select what
procedure they would like to perform if an Error is detected during
automatic/manual Rebuilds or manual Synchronization. There are three types of
4 3
Need help?
Do you have a question about the Promise RAID Function and is the answer not in the manual?