4-2-3 Installing Drivers with Existing Windows 95/98/Me
The following three sections detail the installation of RAID Function drivers on a
system that has Windows 95/98 already installed. If you're installing the RAID
Function drivers on a system during a Windows 95/98 installation, see "Installing
Drivers During Windows 95/98 Installation" on page 22.
Windows 98
1.
After installing the RAID Function controller and configuring the hard drives,
power up the system and boot Windows.
2.
The "Add New Hardware Wizard" will appear, informing you that it has found a
"PCI RAID Controller."
3.
Check the "Search for the best driver for your device" box and click the Next button.
4.
Check the "Specify a Location" box and click Next button.
5.
Type "A:\WIN95-98" in the text box that appears.
6.
Insert the "RAID Function Driver" diskette in drive A:.
7.
Click on "Next." The Add New Hardware wizard will say it has found "Win95-98
Promise MBFastTrak133 Lite controller".
8.
Click on "Next," and then on "Finish."
9.
Choose "Yes" when asked if you want to restart your computer. Be sure to eject the
diskette from drive A:.
Windows 95
1.
After installing the RAID Function controller and configuring the hard drives,
power up the system and boot Windows.
2.
The "Update Device Drive Wizard" will appear, informing you that it has found a
"PCI Mass Storage Controller."
3.
Insert the "RAID Function Driver" diskette in drive A:.
4.
Type "A:\WIN95-98" in the text box, then click on "Next." Windows will inform
you that it has found the "Win95-98 Promise MBFastTrak133 Lite controller".
5.
Click on "Finish," and when prompted to insert the "RAID Function Driver"
diskette, click on "OK."
6.
If a message informing you that the file "MBFastTrak133 Lite.MPD" cannot be
found, go to the "Copy files from:" text box and type: "A:\WIN95-98".
2 5
Installing Driver
Need help?
Do you have a question about the Promise RAID Function and is the answer not in the manual?