Running Fastcheck; Closing Fastcheck - Gigabyte Promise RAID Function User Manual

RAID Function

5-2 Running FastCheck

As described in the Installation section, the default option for FastCheck is to load
during
startup of Win95/98/NT/2000/XP. It appears minimized on the taskbar under Win
95/98/NT4/2000/Millennium/XP (see below).
To start FastCheck, double-click on the FastCheck icon on the taskbar (above) or you
may also use the Taskbar Start/Promise/FastTrak/FastCheck menus shown below.

5-3 Closing FastCheck

Once FastCheck is opened (either automatically on startup or manually), the monitoring
utility remains running in the background even if the user "closes" the FastCheck
window.
To completely shut down FastCheck, perform the following steps.
1. Right-click the FastCheck icon on the Taskbar.
2. Select Exit from the pop-up window.
3. FastCheck will no longer be running and will no longer be monitoring the array..
3 0