RAID Function
3-7
Viewing Controller Settings
The Controller Configuration <6> menu selection allows you to enable or disable the
RAID Function BIOS from halting (the default) if it detects an error on boot up. You
may also view the system resources (Interrupt and I/O port address) of RAID
Fiunction's data channels.
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Channel 1 (IDE1)
Channel 2 (IDE2)
Halting RAID Function BIOS On Bootup Errors
The [Adapter Configuration – Options] section allows you to enable or disable
RAID Function to Halt operation at the BIOS startup screen should an error be
detected. This is the only option that can be changed on this screen.
Viewing RAID Function System Resources
The [System Resources Configuration] section of this submenu displays the PCI slot
interrupt and port address used by the RAID Function. The resources used are
determined by the Mainboard PCI PnP BIOS for the PCI slot in which the
RAID Function resides.
In the rare case that there is a resource conflict, refer to the Mainboard BIOS
documentation on changes on resources allocated to the RAID Channel.
[ Adapter Configuration - Options ]
Halt On Error:
[ System Resources Configuration ]
Interrupt : A I/O Port : FFF0
Interrupt : A I/O Port : FFA8
[ Keys Available ]
[ ,
, Space] Change Option
Enable
[ESC] Exit
2 0
Need help?
Do you have a question about the Promise RAID Function and is the answer not in the manual?