Navigating The Fastbuild™ Setup Menu - Gigabyte Promise RAID Function User Manual

the problem drive.
Offline - A striped array has 1 drive that has failed or been disconnected.
When the array condition is "offline," the user must replace the failed drive(s),
then restore data from a backup source.
3-2 Navigating the FastBuild™ Setup Menu
When using the menus, these are some of the basic navigation tips: Arrow
keys highlights through choices; [Space] bar key allows to cycle through
options;
[Enter] key selects an option; [ESC] key is used to abort or exit the current
menu.
Using the Main Menu
This is the first option screen when entering the FastBuild
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Auto Setup ...............................................[ 1 ]
View Drive Assignments ..........................[ 2 ]
View Array................................................[ 3 ]
Delete Array .............................................[ 4 ]
Rebuild Array ...........................................[ 5 ]
Controller Configuration ...........................[ 6 ]
To create a new array automatically, follow the steps under "Creating Arrays
Automatically" on page 13. We recommend this option for most users.
To view drives assigned to arrays, see "Viewing Drive Assignments"
To delete an array (but not delete the data contained on the array), select "Deleting An
Array" on page 17.
To rebuild a mirrored array, see "Rebuilding an Array"
To view controller settings, see "Viewing Controller Configuration"
NOTE: After configuring an array using FastBuild, you should
FDISK and format the arrayed drive(s) if you are using new,
blank drives. Depending on the type of array you are using.
[ Main Menu ]
[ Keys Available ]
Press 1...6 to Select Option
1 3
Using FastBuid Configuration Utility
Setup.
TM
[ESC] Exit
on page
on page 18.
on page
15.
20.