Table of Contents
Advertisement
RAID Function
Your choices are as follows:
Abort: Halts the synchronization process. You may elect to retry at a later date.
Fix the Error Block: RAID Function will take a good data block from either
drive and copy it to the drive where the error was detected.
Skip the Error Block: RAID Function will log the event error and continue the
synchronization process. Use this setting if you want to detect the presence of
errors, but do not want to fix these errors at the time. You may then decide
what to do about the error(s) detected..
5 8
Advertisement
Table of Contents
Need help?
Do you have a question about the Promise RAID Function and is the answer not in the manual?