RAID Function
7.
Choose "Yes" when asked whether you want to start your computer. Be sure to
remove the diskette from drive A
Confirming Driver Installation in Windows 98/95
To confirm that the driver has been properly loaded in Win 95/98, perform the follow-
ing
steps:
1.
Choose "Settings" from the "Start" menu.
2.
Choose "Control Panel," and then double-click on the "System" icon..
3.
Choose the "Device Manager" tab, and then click the "+" in front of "SCSI & RAID
controllers." "Win95-98 Promise MBFastTrak133 Lite controller" should appear
4-3 DOS/Windows 3.1x
For first-time installation, follow the standard procedure of installing DOS on to your
hard disk (partition all hard drives with FDISK and format before performing the
following procedure):
1.
Insert "Disk 1" of your DOS installation diskettes into drive A:.
2.
Type "A: SETUP" at the "A:\" prompt.
3.
Continue with normal DOS installation procedure, and refer to your DOS manual for
additional details.
NOTE: The RAID Function BIOS supports both DOS and Windows 3.1x without
software drivers.
2 6
Need help?
Do you have a question about the Promise RAID Function and is the answer not in the manual?