Printing Could Be Faster; Roll Paper Cannot Be Cut - Epson STYLUS PRO 9000 User Manual

Printing Could be Faster

Try one or more of these solutions:
To increase print speed, select the Automatic mode in the
Main menu for Windows or in the Print dialog box for
Macintosh and then move the slider towards Speed.
Do not run too many applications at the same time. Close any
applications you are not using.
Delete unnecessary files to make room on your hard disk
drive.
Note:
Your computer may not have enough memory. For further tips, see
"Increasing the Print Speed (Windows only)" on page 85.

Roll Paper Cannot be Cut

Try one or more of these solutions:
Make sure that the Roll Auto Cut light is on. Press the Paper
Source button if necessary. Then press the Cut/Eject button.
The printer cuts the roll paper.
Cut the roll paper by hand if necessary. Check that the paper
thickness of the roll paper loaded in the printer matches the
paper specification (see "Paper" on page 148). If so, the paper
cutter may be blunt and require replacement as described in
"Replacing the Paper Cutter" on page 109.
Note:
If you use roll paper other than EPSON special media, see the user
documentation included with the paper, or contact your supplier.
Troubleshooting
135