Epson STYLUS PRO 9000 User Manual page 90

Note:
If the Roll Auto Cut light is on, and the bottom edge of the roll
paper was not cut properly after the previous print job, press the
Cut/Eject button to recut the edge.
9. Press the Pause button.
The print heads move and the paper feeds into the printing
position automatically.
Note:
Even if you do not press the Pause button, the print heads move
and paper feeds into the printing position automatically.
appears on the LCD panel.
10. Make the printer driver settings (see "Accessing the Printer
Software" on page 33), then send a print job from the
computer. The printer starts printing.
Note:
Make sure that the Paper Source setting in the printer driver
matches the paper loaded in the printer.
11. After you finish printing, you may need to cut the roll paper.
See "Cutting roll paper or printing page lines" on page 92.
appears on the LCD panel.
Paper Handling
90