Patterns #6 and #8 only
1
2
3
4
5
6
7
6. After printing, the pattern number and current set number
are displayed (for example, #1 = 4). Select the set that has the
smallest gaps, then press the + or - button to display the
number for that set.
Note:
If set 4 shows the smallest gaps out of all the printed patterns, the
print heads are aligned. Press the Pause button to exit the mode.
7. Press the Enter button to register the set number. The next
pattern number appears. Then repeat step 6.
8. After you set the pattern(s), press the Pause button to return
to the READY status.
Note:
You can return to step 6 by pressing the Enter button.
The Control Panel
26