6. While holding the printer unit, remove the screws from the
left and right sides, and keep them in a safe place.
7. Have four people lift the printer unit off of the leg assembly,
using the hand grips. The printer unit weighs approximately
100 kg (220 lb) and should be lifted carefully.
8. Move the printer horizontally.
When you set up the printer after transporting, see "Setting up
the printer after transporting it" on page 120. Before you use the
printer after transporting, you may need to perform a nozzle
check and realign the print heads. See your Startup Guide.
Maintenance and Transportation
118