Epson STYLUS PRO 9000 User Manual page 21

When the same image is printed with a 3 mm margin and a 15
mm margin and compared, you may notice that part of the right
side of the 15 mm margin image is not printed.
Area to be
Clipped
15mm
Right
INIT. PANEL (Panel settings initialization)
Erases all the SelecType settings that you have made, and resets
them all to the factory default settings.
Test Print menu (TEST PRINT MENU)
This menu allows you to print test patterns.
NOZZLE CHECK (Nozzle check pattern printing)
Prints the nozzle check pattern for 6 nozzles. From the printing
results, you can check for missing dots. Also, the firmware version
is printed. For details, see Chapter 1, "Printing a nozzle check
pattern".
You can perform nozzle check pattern printing using the utility.
STATUS CHECK (Status printing)
Prints the current SelecType status. For details, see Chapter 1,
"Printing a status sheet".
Printable area
Leading edge
Bottom
15mm
Roll paper
Top
15mm
Print direction
15mm
Left
The Control Panel
21