Table of Contents
Advertisement
Contents
PRODUCT INFORMATION
Front panel ........................................ 1
Side panel .......................................... 3
Back panel ......................................... 4
Remote control .................................. 5
Video Cassettes Tapes ........................ 7
Connections ....................................... 8
DISPLAY
Display Sequence ............................. 10
Change Display Mode ...................... 12
Monitor Mode Set ............................ 14
Normal Recording ........................... 21
Program Timer Recording ............... 22
Alarm Recording .............................. 27
Autorepeat Recording ...................... 29
Normal Playback .............................. 30
Normal Playback .............................. 30
Tracking Control .............................. 30
Audio Playback ................................ 30
Special Playback .............................. 31
Picture Search ................................. 31
Still Image ........................................ 31
Vertical Lock Control ....................... 31
Slow ................................................. 31
Recording Check ............................. 31
Other Functions ............................... 32
Alarm Search ................................... 32
Alarm Scan ...................................... 33
Index Search .................................... 33
Zero Search (Tape counter) ............ 34
Recording Display Set ...................... 35
Checking Power Loss Times ............. 37
Setting the Buzzer ............................ 37
Setting the Default Load ................... 38
Setting Usage Duration ..................... 38
Setting In/Out terminals ................... 39
THE OTHERS
Daily Inspection .............................. 40
Troubleshooting Guide .................... 41
Specifications .................................. 43
Locations of controls and indicators
Front panel
1
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1280 HOUR TIME LAPSE RECORDER - 40 HOUR REAL TIME
18
19
20
21
22
23
24
1 REMOTE SENSOR
2 STANDBY/ON button
Used to turn the monitor ON or OFF.
When the POWER turns on newly, the
LED of this button will be blinking. At this
moment press any button, then it stops
blinking and enters into standby mode.
3 VOLUME Up button
Used to raise the volume.
4 ALARM ON/OFF button
Used to recognize external alarm signal.
To turn the alarm function ON or OFF,
press and hold this button for 2~3
seconds.
* In alarm OFF mode, alarm recording
can't be performed even if there is
alarm signal.
5 MIC
The microphone signal comes to outside
only while the TALK button is pressed.
6 CLEAR/DISPLAY button
If you press this button shortly, it activates
17
25
26
27
28
29
30
31
32
as CLEAR button so tape counter will be
reset to "0:00:00" with the tape loaded.
If you press and hold this button more
than 3 seconds, it activates as DISPLAY
button so all data (date/time, tape
counter, etc...) will be disappeared from
the screen. To display all data on the
screen, press and hold this button again
more than 3 seconds.
7 ZOOM button
is to enlarge the selected channel. Then
move the zoomed point up, down, left or
..., †, œ or √ button. To
right with
select desired camera, press C1, C2, C3
or C4 button before pressing ZOOM
button.
8 FREEZE button
Used to freeze the picture of camera
signal.
9 PIP/TRACKING- button
The signals of two cameras will appear
on the screen at the same time. There
are one main screen and the other small
screen on right bottom side. If you press
1
Advertisement
Table of Contents
