Autorepeat Recording - Sylvania SY20C6144-A Owner's Manual

Alarm Recording
6 Set Alarm REC to "Yes" in order to enable Alarm
Recording by pressing the SET- (or+) button.
7 Press the SET- (or+) button to select the desired
recording speed.
2H : 2-hour mode recording, 6H : 6-hour mode recording, 18H :
18-hour mode recording, 30H : 30-hour mode recording
8 Press the SHIFT
Press the SET- (or+) button to select the desired
recording duration.
• Auto : Records as long as the alarm signal is being input.
• 3/5/10/15/20/25/30 MIN : Recording for the set duration.
• T.END : Records until the tape end is reached when there is
9 Press the MENU button until the normal screen is
displayed.
Alarm Recording Counter Display
During alarm recording, alarm LED will be lit on the front
panel.
• Alarm Counter Reset can
The maximum display number of alarm triggers is "A35",
be performed by pressing
at the next alarm recording the counter will be displayed
the CLEAR key in Initial
Menu screen. "A35".
28
ALARM REC SET
√ Alarm REC
Yes
Speed 02H
Duration Auto
shift: sel:√ end:MENU
†
button to set the alarm duration.
(Minimum 2 minutes is recorded.)
(MIN : minute)
alarm trigger input.

Autorepeat Recording

Autorepeat Recording
The same tape can be recorded over many times. Please
note that if you activate this feature you will lose the entire
previous recording.
1 Press the MENU button, the initial MENU is displayed.
Press the SHIFT
"VCR Mode Set".
2 Press the SHIFT
is displayed.
3 Press the SHIFT
"Rec Set". Press the SHIFT
menu is displayed.
4 Press the SHIFT
• If during autorepeat
recording there is an
"Repeat REC Set".
alarm trigger, R.REC LED
is lit on and alarm
5 Press the SET- (or+) button to set the desired
recording will take place.
autorepeat recording mode.
Autorepeat recording will
continue after alarm
NO ...... Autorepeat recording doesn't take place.
recording has completed
YES ..... Autorepeat recording takes place. R.Rec LED will
its programmed duration.
6 Press the MENU button two times, the normal screen
is displayed.
• The setting procedure is now complete.
7 Press the REC button.
• Recording will start. When the tape's end is reached, the
VCR will rewind it to the beginning regardless of the
counter memory, and recording will resume.
button until √ mark is located in
button, the VCR MODE SET menu
√
button until mark is located in
button, the REC SET
REC SET
Timer Program Set
Alarm REC Set
√ Repeat REC Set
No
shift: sel:√ end:MENU
†
button until √ mark is located in
be lit on.
29