Sylvania SY20C6144-A Owner's Manual page 17

Program Timer Recording
• Repeat steps 7 to 14 to program timer recordings for
other days of the week.
• To set two or more timer recordings the same day of the
week, press the SHIFT
in the day of the week for the second recording, then
press the SET – (or +) button, to set the desired day of
the week. With each press of the SET – ( or +) button,
the day will change as indicated below.
SET – :
13 Press the MENU button until the normal screen is
displayed.
• To modify or cancel timer
14 Press the TIMER button.
recording, press the TIMER
• The Timer recording LED will be lit on.
button to cancel the timer
recording mode.
The VCR is now in timer recording stand-by mode.
Example 2 : To record everyday from 10 : 00 to 18 :
1 Repeat steps 1 to 6 of example 1.
2 Press the SHIFT
"DLY".
3 Repeat steps 8 to 14.
24
button, until the cursor located
direction , SET + : direction
00, in 18-hour mode (recording speed)
button, until the cursor is on
TIMER PROGRAM SET(1)
START END SPD
TUE 21:10 23:50 18H Y
√ DLY --:--
--:-- --H N
TUE --:-- --:-- --H N
WED --:-- --:-- --H N
THU --:-- --:-- --H N
√ sel: +– end:MENU
shift:
†
Program Timer Recording
Changing a Program Timer Recording
1 Repeat step 1~6 of program example 1.
2 In TIMER PROGRAM REC SET (1) menu, press the
SHIFT (or ) button, until the cursor is located in
the setting to correct.
TIMER PROGRAM SET(1)
START END SPD
TUE 21:10 23:50 18H Y
√ DLY 12:00 18:00 18H Y
TUE --:-- --:-- --H N
WED --:-- --:-- --H N
THU --:-- --:-- --H N
√ sel: +– end:MENU
shift:
†
3 Press the SET – (or +) button, to correct the setting.
4 Press the MENU button until the normal screen is
displayed.
5 Press the TIMER button.
To Cancel a Program Timer Recording
1 Repeat step 1~6 of program example 1.
2 In TIMER PROGRAM REC SET (1) menu, press the
SHIFT (or ) button until the cursor is located in
the "Y" corresponding to the timer recording to
cancel.
TIMER PROGRAM SET(1)
START END SPD
TUE 21:10 23:50 18H Y
√ DLY 12:00 18:00 18H N
TUE --:-- --:-- --H N
WED --:-- --:-- --H N
THU --:-- --:-- --H N
√ sel: +– end:MENU
shift:
†
3 Press the SET – (or +) button, to select "N".
4 Press the MENU button two times until the normal
screen is displayed.
5 Press the TIMER button.
• The clear button can erase the programmed timer
recording in the line that the cursor is located.
25