Table of Contents
Advertisement
Program Timer Recording
Notes...
• During timer recording all the buttons on the VCR, except
the STOP button, are disabled. If the STOP button is pressed
during timer recording, the recording will stop. During
timer recording stand-by, press the TIMER button if the
buttons do not respond.
• If there is a power loss, the recording will be interrupted.
When the power is restored, the recording will resume if
the stop time has not yet been reached. The VCR internal
battery is completely charged after the VCR has been
connected to an AC power outlet for 48 hours, and it will
maintain all the VCR settings memory for up to 30 days.
• Set the timer recordings so that the recording times do not
overlap. If they do, the one with the earliest recording start
time will have priority.
(See chart below)
Program 1
Program 2
Program 3
• If the cassette tape is ejected while timer recording is set,
the buzzer will be heard 5 times (when the buzzer function
is set to "YES".)
26
These portions will
not be recorded.
Alarm Recording
Alarm Recording Setting
Alarm recording is performed when there is an input
• During alarm recording all
buttons are disabled
(trigger) at the ALARM IN terminal.
except the STOP button. If
the STOP button is
1
Make all necessary connections.
pressed, the alarm
2
Press the MENU button, the initial MENU is displayed.
recording will stop.
Press the SHIFT
• If an alarm trigger is
"VCR Mode Set".
received while alarm
recording is in progress,
the recording duration for
the second alarm will be
calculated from that point.
• When there is a power
loss during alarm
recording, if the power is
restored within the
recording set duration,
3
Press the SHIFT
alarm recording will
is displayed.
continue.
• Alarm recording is
released and can't be
performed by pressing
ALARM button (on the
remote control) and
MENU button (on the front
panel) for 2 seconds.
4
Press the SHIFT
"Rec Set". Press the SHIFT
menu is displayed.
5
Press the SHIFT
"Alarm REC Set". Press the SHIFT
ALARM REC SET menu is displayed.
button until
√
mark is located in
MENU
Monitor Mode Set
√ VCR Mode Set
Terminal Output Set
Buzzer Set
YES
Alarm Time
Power Loss Time
Default Load
NO
shift:
sel:√
end:MENU
†
button, the VCR MODE SET menu
VCR MODE SET
Tape Search Select
REC Display Set
√ REC Set
Running Time
00000H
shift:
sel:√
end:MENU
†
button until
√
mark is located in
button, the REC SET
REC SET
Timer Program Set
√ Alarm REC Set
Repeat REC Set
No
shift:
sel:√
end:MENU
†
√
button until
mark is located in
button, the
27
Advertisement
Table of Contents
