Table of Contents
Advertisement
Other Functions
Zero Search (Tape Counter)
Using the counter, it is easy to find a desired recording.
• When you insert a
cassette, the counter
always resets to zero.
1
Press the CLEAR button, at the beginning of the
desired recording.
• There is no tape counter
indication for the blank
• The counter will be reset to "0H 00M 00S" (on screen).
portions of tape.
2
After recording or playback, press the MENU button,
• In the 2-hour recording
speed mode only, the tape
the initial MENU is displayed. Press the SHIFT
counter indicates real
button until
hours, minutes and
seconds.
3
Press the SHIFT
• In the other SP recording
is displayed.
speed modes (48H), the
tape counter indication is
4
Press the SHIFT
a ratio of the 2-hour mode
base indication.(In 48-
menu is displayed.
hour recording mode,
each "second" of the tape
counter actually represents
approximately 48/2 =
24 real seconds.)
• In the other EP recording
speed modes (18H), the
tape counter indication is
a ratio of the 6-hour mode
base indication. (In 18-
hour recording mode,
5
Press the SHIFT
each "second" of the tape
counter actually represents
Search".
approximately 18/6 = 3
real seconds.)
6
Press the SHIFT
• There may be a slight
00M 00S".
discrepancy between the
position shown on the
• The display returns to the normal screen.
tape counter and the
• The tape is rewound or advanced to the counter "0H 00M
actual tape position.
00S" reading.
• When rewinding the tape
past the "0H 00M 00S"
position, a minus(-)
displayed.
34
√
mark is located in "VCR Mode Set".
button, the VCR MODE SET menu
button, the TAPE SEARCH SELECT
TAPE SEARCH SELECT
Alarm Search
FF
- -
REW - -
Index Search
FF
REW
√ Zero Search
shift:
sel:√
end:MENU
†
button to move
√
mark to "Zero
button to search the counter "0H
Recording Display Set
1
Press the MENU button, the initial MENU is displayed.
√
Press the SHIFT
button until
mark is located in
"VCR Mode Set".
2
Press the SHIFT
button, the VCR MODE SET menu
is displayed.
VCR MODE SET
Tape Search Select
√ REC Display Set
REC Set
Running Time
00000H
shift:
sel:√
end:MENU
†
√
3
Press the SHIFT
button until
mark is located in
"REC Display Set". Press the SHIFT
DISPLAY SET menu is displayed.
REC DISPLAY SET
DISPLAY
POSITION
√ Time
No R-Bottom
Date
No R-Bottom
Frame Cnt. No R-Bottom
Alarm Cnt. No R-Bottom
Counter
No L-Top
Tape SPD No L-Top
√ sel: +– end:MENU
shift:
†
4
Set each item to desired mode, YES or NO. And select
the position of each item. If you set it to YES, it will be
displayed in selected position during playback.
Other Functions
button, the REC
35
Advertisement
Table of Contents
