Recording; Normal Recording - Sylvania SY20C6144-A Owner's Manual

5 Press the SET – (or +) button to set the modes you
want.
BRIGHTNESS : Adjusts screen brightness
CONTRAST : Adjusts screen contrast
COLOR : Adjust the amount of color
SHARPNESS : Adjusts screen sharpness
TINT : Changes the color tone
6 Press the MENU button until the normal screen is
displayed. The setting procedure is now complete.
20
Monitor Mode Set
PICTURE
Brightness œ √
Contrast œ √
œ √
Color
Sharpness œ √
œ √
Tint
Position +– adjust
†
MENU Exit

Normal Recording

Normal Recording
1 Turn the power on to all devices used.
2 Load a cassette tape with erasure prevention tab in
• If the Repeat Rec Set is set
place.
to "NO" in the REC SET
Press the REC/PLAY SPEED † (or ...) button to set
MODE menu , recording
3
will continue to the end of
the recording speed.
the tape, then stop and the
tape will be ejected.
• The recording speed is displayed on-screen.
• If you don't want to record the recording speed, counter,
title, time, date etc, press the DISPLAY button, then start

recording.

• A tape recorded on this
4 Press the REC button.
set cannot be played back
on another make of time
• The Rec LED will be lit on and recording starts.
lapse VCR.
5 To stop recording, press the STOP button.
• If you press on the REC
button and the loaded
<Recording Speed>
cassette has no erasure-
prevention tab, the set will
Recording Speed
eject the cassette.
& Duration
(T-120)
• During recording, the
2 (SP)
Menu button will not
function (the menu cannot
6 (EP)
be accessed).
18 (EP)
30 (EP)
48 (SP)
72 (SP)
• If you playback the
96 (SP)
recorded part where
recording check was 120 (SP)
performed, noise may
168 (SP)
appear.
240 (SP)
• If you change the 360 (SP)
recording speed during
480 (SP)
recording, noise or
720 (SP)
missing signal may result.
960 (SP)
• Audio recording in the 18 hour setting or above may
result in distortion of the audio/or video and is therefore
not recommended.
Record Pause
• During pause, the image
appears on screen but it is
Recording can be interrupted temporarily.
not recorded.
1 Press the PAUSE/STILL button during recording.
• If a recording pause
continues for 5 minutes or
2 To resume recording, press the REC button, or press
more, the set will go into
the PAUSE/STILL button again.
stop mode to avoid
damage to the tape.
Recording
Audio
Recording Rec. Field/
Duration Tape Motion
Interval sec Recording
(T-160)
2.67 1/60 sec 60
8 1/60 sec 60 YES Continuous
24 3/60 sec 20
40 5/60 sec 12
64 24/60 sec 2.5
96 0.6 1.67
128 0.8 1.25
160 1.0 1
224 1.4 0.71 NO Intermittent
320 2.0 0.5
480 3.0 0.33
640 4.0 0.25
960 6.0 0.17
1280 8.0 0.125
21