Various Preference Settings; System Information; Restore Defaults - Daewoo DVR-S05 User Manual

Various PREFERENCE Settings

AutoPlay
With Auto Play turn ON (the factory default setting), the VCR
automatically starts playback when you insert a tape with its
safety tab removed.
1
Use [.../†] to select 'AutoPlay'.
2
Press [ENTER] or [√] to go to the second level.
3
Use [.../†] to set the AutoPlay Status.
4
Press [ENTER] to confirm.
Auto Clock
Auto Clock enables the DVD Recorder+VCR to set the clock
automatically whenever it is in Standby mode (plugged in but
powered off).
Follow the same procedure as 'AutoPlay' to set the 'Auto Clock'
status.
• Not available function on this model.
VCR
This feature enables you to search for Index marks or specific times on your VHS
tapes.
1
While 'Preference' is selected, press [†] to move to the second level.
2
Use [.../†] to select 'VCR'.
3
Press [ENTER] to display the submenu.
4
Select 'Index Search' or 'Go-To Search'.
5
If you select 'Index Search' and press [ENTER], a submenu appears. Use
[.../†] to select the index number you want to search and press [REW] or [FF].
6
If you select 'Go-To Search' and press [ENTER], a submenu appears. Use [.../†] to change the time counter
number and press [REW] or [FF].
• The VCR menu is activated only when a video cassette tape is inserted.
VCR
Index Search
Go-To Search
Index Search
Press REW or FF to begin search
Instructions
or enter a specific Index number
Enter-Confirm Setup-Exit Move ...†
– –
Setup-Exit
26
Initial Setup
Preference
Video
Audio
Parental Controls
Auto Play
Select AutoPlay
Auto Clock
Status
VCR
Off
Instructions
On
Enter-Confirm Setup-Exit
Move ...†
Preference
Video
Audio
Parental Controls
Auto Play
Auto Clock
Select Auto
VCR
Clock Status
Instructions
Off
Enter-Confirm Setup-Exit
Move ...†
On
Preference
Video
Audio
Parental Controls
Auto Play
Auto Clock
VCR
Instructions
Enter-Confirm Setup-Exit
Move ...†
VCR
Index Search
Go-To Search
Go-To Search
Current Tape Counter is
Instructions
– :––:––
Enter-Confirm Setup-Exit Move ...†
Press REW or FF to go to
– : – – : 00
Setup-Exit

System Information

System Information helps service personnel identify key firmware information
about your DVD Recorder+VCR in case service is required.

Restore Defaults

If you wish, you can reset the DVD Recorder+VCR to its original
factory settings.
1
Press [SETUP].
2
Use [œ/√] to select 'Restore Defaults'.
3
Press [ENTER].
4
The Initialize menu will appear. Use the [.../†] buttons to
select 'Yes' and press [ENTER].
• Some options cannot be reset, including Parental Controls,
Password, and Country Code.
• After Restoring Defaults the unit reboots automatically and the Installation menu appears. You must set the
country, language, channel, and clock settings again.
Initial Setup
System Info
Version FN300BBAAVL
Main Build 3.2.8
Main Software 3.1.1
DVD Navigation 2.0.0
Loader Version BDR-Z172
Instructions
Enter-Confirm Setup-Exit
Move ...†
Restore Defaults
If you select this function all
settings will be removed and
Are you sure you want to restore
the product will be set into
default settings?
initial (factory) mode.
Yes
No
Instructions
Enter-Confirm Setup-Exit
Move ...†
27