On-Screen Display Overview - Daewoo DVR-S05 User Manual

On-Screen Display Overview

On-Screen Display Overview
The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded
disc or tape. To access the On-Screen Display (or OSD), press the [DISPLAY] button.
Displaying Disc Information
To display information about the currently loaded disc or tape:
On-screen display operation
1
Press [DISPLAY] repeatedly to display/change the information displayed on-screen.
2
To remove the on-screen display, press [DISPLAY] repeatedly until it disappears.
See the descriptions below for detailed explanations of the on-screen displays for each media type.
• Some discs may not provide all the features shown in the on-screen display examples.
Temporary Feedback Icons
Action prohibited or not available
Displaying TV Information
While watching TV, press [DISPLAY] to display/remove the on-screen display.
If no rewritable DVD disc is inserted, you would see a screen like the following:
If a DVD+R or DVD+RW disc is inserted, the disc information is displayed at the first key press. If you press
[DISPLAY] again then the TV information is displayed.
current date and time
channel number audio output signal
CH-02 10:24PM AUDIO:Stereo
Changing TV Channels
If no disc is playing, you can change TV channels using the [0-9] or [CH +/-] buttons on the remote control or [CH
.../†] buttons on the front panel.
• Antenna channels are numbered 2 through 69. Cable channels are numbered 1 through 125.
28
DVD+R
00:00:00 01:04:02
Changing the TV Audio Channel
Some TV programs are broadcast with both a main and a Secondary Audio Program (SAP). You can change the
TV audio using the [AUDIO] button.
Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.
• STEREO+SAP Audio Signal
Stereo ➝ Mono (No display) ➝ SAP ➝ Stereo
• STEREO Audio Signal
Stereo ➝ Mono(No display) ➝ Stereo
• SAP Audio Signal
Mono ➝ SAP ➝ Mono
• MONO Audio Signal
Mono(No display)
The current audio channel is displayed on-screen.
• If SAP is selected, but there is no SAP channel being broadcast, you will still hear the main audio channel.
• If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.
• When an external input is selected, the audio channel can be switched only to Stereo.
OSD Menu Options for DVD
During DVD playback, press [DISPLAY] to show information about the current disc.
While the disc information is displayed, press [DISPLAY] again to show the disc
remaining time.
Title
Shows the current title number and total number of titles, and skips to the desired title number.
1
Press [DISPLAY] during playback. The on-screen display appears on the TV screen.
2
Use [...†] to select the 'Title' icon on the on-screen display. Press [ENTER] to display a submenu.
3
Use [...†] to change the numbers.
4
Press [ENTER] to confirm.
On-Screen Display Overview
29