One Touch Copy - Dvd To Vhs; Copy Edit (Dvd ➝Vcr); One Touch Copy - Vhs To Dvd; Copy Edit (Vcr ➝ Dvd) - Daewoo DVR-S05 User Manual

One Touch Copy - DVD to VHS

• If the DVD you are attempting to copy is copy-protected, you will not be able to copy the disc. It is not permitted to
copy Macrovision encoded DVDs.
• Copy to VCR does not work in Progressive Scan Mode.
1
Insert a Disc.
Insert the disc you wish to copy in the DVD deck and close the disc tray.
2
Insert a VHS Tape.
Insert a blank VHS videotape into the VCR deck.
3
Press [COPY] on the remote control.
4
➝
Select (DVD VCR) and press [ENTER] or [COPY] to confirm.
5
Press [REC SPEED] to select the desired Record Mode in 'Copy to Tape'
menu:
• SP (Standard Play)
• LP (Long Play, 2 times SP).
6
Press [COPY] again to start copying.
7
Stop the Copy Process
To stop copying at any time, press [STOP]. You must stop the Copy process manually
when the DVD movie ends, or the unit may replay and record over and over again.
If you want to start copy any point of disc
1. Find the place on the DVD (or Disc) from which you want to start recording using the
[PLAY/PAUSE], [REW] and [FF] functions.
Press [COPY] while DVD is in pause mode or in resume stop ( » STOP) mode.
2.
3. Follow the same procedure 5-7.
Copy Edit (DVD ➝VCR)
During one touch copy you can search or change REC SPEED and resume copy.
1
During One Touch Copy press [PLAY/PAUSE] to enter COPY EDIT mode.
2
Search with [FF/REW] or [NEXT/PREV] button.
3
Press [COPY] and you can change REC SPEED.
4
Press [COPY] again to resume copy.
40
Basic Recording
Quick-Copy Menu
Please Select Quick Record Option
DVD -> VCR
VCR -> DVD
Instructions
Enter-Confirm Move ...†
Copy to Tape
Choose speed then
press COPY:
LP
SP
I I I Stop

One Touch Copy - VHS to DVD

You can copy the contents of a VHS tape to a DVD+R or DVD+RW using the [COPY] button. This allows you to
archive your old VHS tapes to DVD.
If the VHS videotape you are attempting to copy is copy-protected, you will not be able to copy the tape. It is not
permitted to copy Macrovision encoded tapes.
1
Insert a VHS Tape.
Insert the VHS videotape you wish to copy into the VCR deck.
2
Insert a DVD+R or DVD+RW disc.
Insert a blank DVD+R or DVD+RW disc in the DVD deck and close the disc tray.
• When using a DVD+RW disc, you must initialize before copying; see page 46.
3
Find the place on the VHS tape from which you want to start recording using the [PLAY/PAUSE], [FF] and [REW]
functions. And press [STOP].
4
Press [COPY] on the remote control.
5
➝
Select (VCR DVD) and press [ENTER] or [COPY].
6
Press [REC SPEED] to select the desired Record
Mode in 'Copy to Disc' menu:
• HQ (High Quality - 1 hr/disc)
• SP (Standard Play - 2 hrs/disc)
• EP (Extended Play - 4 hrs/disc)
• SLP (Super Long Play - 6 hrs/disc)
7
Press [COPY] again to start copying.
8
Stop the Copy Process
To stop copying at any time, press [STOP].
Copying will stop automatically when the VHS tape ends.
Copy Edit (VCR ➝ DVD)
During one touch copy you can search and resume copy.
1
Press [PLAY/PAUSE] to enter COPY EDIT mode.
2
Press [PLAY/PAUSE] again to playback.
3
Search with [FF/REW] button.
4
Press [COPY] to resume copy.
Basic Recording
Quick-Copy Menu
Please Select Quick Record Option
Copy to Disc
DVD -> VCR
VCR -> DVD
Choose quality then
press COPY:
Instructions
HQ
Enter-Confirm Move ...†
SP
EP
SLP
DVD Status
I Stop
0 : 00 : 10
Copy to Disc
Updating the disc. This may take a few
minutes. Please wait...
Instructions
Setup-Exit
41