Table of Contents
Advertisement
6
Select the desired disc playback subtitle language using [.../†]. Press
[ENTER] to confirm.
7
The DVD Recorder+VCR detects channels automatically and stores them
in memory.
8
After finishing Auto Channel Search, set the clock.
9
Use [œ/√] to move left/right and use [.../†] to change the settings.
10
After setting the clock, press [ENTER] to confirm. If you cancel the process
during Initial Installation, you should repeat this procedure.
Re-Installation
This set is equipped with the muti-tuner for receiving many countries' broadcasting. In order to receive broadcasting of
different countries, follow as below.
1
Press [SETUP] and select the 'Restore Defaults' using [
2
Power On, then you see the 'Initial Installation'.
3
Select the contry which you want to (see step 3 on page 19), then repeat the steps 4~10 on page 19~20.
20
Initial Installation
Installation
Please select disc subtitle language:
Default
English
Spanish
French
Czech
Danish
German
Instructions
Enter-Confirm Setup-Exit Move ...†
Installation
Searching for available TV stations:
2 channels found
Please wait...
Instructions
Setup-Exit
Set Clock
Please set the clock:
...
Time : 13 : 00
†
Date : 02 / Jan / 2010 (Sat)
Instructions
Enter-Confirm Setup-Exit Move ...†
œ / √ ]. Then, RESET the set. (see page 32)
Initial Setup
Initial Setup
Setup Menu Overview
The DVD Recorder+VCR Setup menu includes six categories, including: Installation, Recording Options,
Languages, Preferences, System Info, and Restore Defaults. Press [SETUP] and [œ/√] on the remote control to
view the first and second levels of the Setup menu.
Menu Navigation
1
Press [SETUP]. The Setup menu appears.
2
Use [œ/√] to select the desired category.
3
While the desired category is selected, press [.../†] to move to the second level.
4
Press [ENTER] to move to the third level.
5
Use [.../†] to select the desired setting, then press [ENTER] to confirm your selection.
Some items require additional steps. Press [SETUP] at any time to return to the previous menu.
6
Press [SETUP] to exit the Setup menu.
INSTALLATION Settings
Manual Set
To complete the set-up of your DVD Recorder+VCR when the auto set has
not stored all of the channels or when you wish to store a new channel.
1
Press [SETUP]. The Setup menu appears.
2
Use [œ/√] to select 'Installation'.
3
While 'Installation' is selected, press [†] to select 'Manual Set'.
4
Press [ENTER]. The 'Manual Setup' menu appears.
5
Use [.../†] to select 'Standard'. Press [ENTER] to move to the second
level.
6
Use [.../†] to select the desired 'Standard' (PAL-BG, PAL-II, PAL-DK, or
SECAM-L), then press [ENTER].
This set is equipped with the Multi-Tuner. You can search broadcastings of
other countries. If the set can not search the channels, please Re-Install. (see
page 20.)
7
Use [.../†] to select 'Reception'. Press [ENTER] to move to the second
level.
8
Use [.../†] to select the desired broadcast system (Aerial or Cable),
then press [ENTER].
Aerial:
If you are using a standard antenna to receive channels.
Cable:
If you are using basic cable to receive channels.
Installation
Manual Set
Auto Set
Set Clock
Adjust Channels
Instructions
Enter-Confirm Setup-Exit
Move ...†
Manual Setup
Standard
PAL-BG
Select The
Reception
Aerial
standard.
Auto Search
CH-02
PAL-BG
Fine Tune
PAL-II
Decoder
N/A
Store Channel
PR-01
PAL-DK
Program Name
P-01
SECAM-L
Instructions
Enter-Confirm Setup-Exit Move ...†
Manual Setup
Standard
PAL-BG
Reception
Aerial
Select The
Auto Search
CH-02
Reception.
Fine Tune
Aerial
Decoder
N/A
Store Channel
PR-01
Cable
Program Name
P-01
Instructions
Enter-Confirm Setup-Exit Move ...†
21
Advertisement
Table of Contents
Troubleshooting
