Editing; Disc Initialize; Disc Menu - Daewoo DVR-S05 User Manual

Editing

Editing

DISC Initialize

• If you load a blank DVD+R(+RW) disc, it will be initialized (formatted to enable recording).
• Do not start recording until disc initialization is complete.
• If you load a DVD+RW that has already been used you can record a program immediately.

Disc Menu

For recordable DVD media, such as DVD+R and DVD+RW discs, you can manage the disc using the Disc Menu.
The DVD+R Disc Menu allows you to rename your disc or finalize it so it will be compatible with most other
DVD players. The DVD+RW Disc Menu allows you to erase, lock, or unlock your disc. You can also make it
compatible with most other DVD players.
Information / Erase the disc (DVD+RW)
1
Press [MENU] to go to Disc Menu mode.
2
In Disc Menu mode, press [...] to move to the top menu.
3
Press [√] to display the Disc Menu.
4
The Disc Menu shows you disc information, such as disc type, number of recordings,
total titles, free space, etc.
5
Use [œ/√] to select the Disc Erase menu.
6
If you want to erase the whole disc, press [ENTER].
7
To confirm, select 'Yes'. To cancel, select 'No'. If you select 'Yes' and press [ENTER],
all the contents of the disc will be lost.
• DVD+R discs cannot be locked (unlocked) or erased.
Lock/Unlock Disc (DVD+RW)
If you want to protect a disc from accidental recording, editing, or erasing, you can lock
the disc. Later, if you change your mind, you can unlock the disc.
1
Use [...] to go to the top menu.
2
Press [√] to display the Disc Information Menu.
3
Use [œ/√] to select 'Lock/Unlock Disc'.
4
Press [ENTER] as shown on the screen.
5
You can see the current disc status (Locked or Unlocked).
46
6
You can change the disc status by selecting 'Yes' and pressing [ENTER].
7
The Changing Disc Status bar will appear. This process takes a few seconds.
8
After the process is finished the menu disappears automatically.
Information
Type DVD+RW Finalize (Make Compatible)
Recordings 5
Total Title 00:57:57
Finalizing a DVD+R 'locks' its recordings in place so the disc can be played on most standard DVD players or
Free Space 01:48:48
Finalized -
computers equipped with DVD-ROM drives.
Locked No
Compatible Yes
'Make Compatible' for a DVD+RW will automatically create a menu screen for navigating the disc. This menu
Instructions
screen is accessible by pressing [MENU] or [TITLE].
Setup-Exit
• Once you have finalized a DVD+R disc, you cannot edit or record anything else on that disc.
1
Use [...] to go to the top menu.
Erase the disc
Press [Enter] if you want
2
Press [√] to display the Disc Information Menu.
to erase the disc. All
existing recordings will
3
be cleared.
Press [√] and select 'Finalize' for a DVD+R, or 'Make
Compatible' for DVD+RW.
4
Press [ENTER] as shown on the screen.
Instructions
Enter-Confirm
Erase the disc
Erase the disc?
All recordings will be lost.
5
Yes
Select 'Yes' using [...] and press [ENTER] to finalize the disc
No
(or make the disc compatible if it is a DVD+RW).
6
Press [ENTER] again.
Instructions
7
Enter-Confirm Move ...†
Press [SETUP] to go to the top disc menu.
• 'Finalize (Make Compatible)' can take up to 3-4 minutes
depending on the type of disc, how much is recorded on the
disc, and the number of titles on the disc.
Lock/Unlock Disc
• If you do not make your DVD+RW disc compatible, your edits
Press [Enter] to lock the
will not be recognized by other DVD players.
disc. This prevents future
disc operations or
• It may take over 7 minutes for finalizing the edited disk, you'd
recordings.
better wait till the set finish the finalizing operation.
Instructions
Enter-Confirm
Editing
Lock/Unlock Disc
Disc is unlocked.
Do you want to lock it?
Yes
No
Instructions
Enter-Confirm Move ...†
Lock/Unlock Disc
Changing disc lock status.
Please wait a moment....
••• DVD+R disc ••• ••• DVD+RW disc •••
Finalize Make Compatible
Press [Enter] to make any Press [Enter] to make any
previous title editing previous title editing
compatible with your DVD compatible with your DVD
player. player.
Instructions Instructions
Enter-Confirm Enter-Confirm
Finalize Make Compatible
Make disc compatible with Make disc compatible with
your DVD player. your DVD player.
Yes Yes
No No
Instructions Instructions
Enter-Confirm Move ...† Enter-Confirm Move ...†
Finalize Make Compatible
Finished. Finished.
This Disc should already This Disc should already
be compatible. be compatible.
ok ok
Instructions Instructions
Enter-Confirm Move ...† Enter-Confirm Move ...†
47