Various Preference Settings - Daewoo DF-4500P/4700P User Manual

DF-T35-37D2P-WB 2006.8.24 4:57 PM
Change Password
1
While 'Preferences
Ctrl'.
2
Press [√] to select 'Password'. Then press [ENTER].
3
The 'Input Password' submenu appears. Enter your current 4-digit
password then press [ENTER].
4
Enter a new 4-digit password, then press [ENTER]. Re-enter the new password to
confirm, press [ENTER].
Master Password :
•
control and then press [ENTER].
• Set the new password to something other than '0000'.
Various 'Preferences' Settings
1
Press [SETUP]. The Setup menu appears.
While 'Init Setup' is selected, press [ENTER] to go to the initial setup
page.
2
Use [œ/√] to select 'Preferences
3
While 'Preferences
Settings'.
4
Press [√]. The 'Auto Settings' submenu is displayed.
Auto Clock Set
Auto Clock enables the DVD Recorder+VCR to set the clock automatically
whenever it is in Standby mode (plugged in but powered off).
Auto Clock is only available for models with the VPS/PDC function.
Some broadcasting stations may send the time and date along with the VPS/PDC
data. The video will automatically use this time and date during the initial setting up
procedure during normal use, and every time you switch the video off at the mains.
If you find that this time and date is incorrect you can remove this feature by
following the steps below changing it to the OFF mode, you will then have to
manually set the time and date, see above.
1
Use [.../†] to select 'Auto Clock Set' and press [ENTER].
2
Use [.../†] to change the 'Auto Clock Set' status, and press [ENTER] to confirm.
˘ ` 25 mac001
' is selected, press [†] to select 'Parental
If you forget your password, press 3,3,0,8 on the remote
'.
' is selected, press [†] to select 'Auto
1200DPI 90LPI
Preferences
Video
Audio
Parental Ctrl Parental
Auto Settings • Password
VCR
Modulator Out
œ √ ... Choose OK
ENTER
†
Input Password
Old Password
New Password
Confirm PWD
0-9 Input digits
... Select
œ √
†
Preferences
Video
Audio
Parental Ctrl
•Auto Settings Auto Clock Set
VCR VPS/PDC
Modulator Out
...
œ √ Choose ENTER OK
†
Preferences
Video
Audio
Parental Ctrl
Auto Settings •Auto Clock Set
VCR VPS/PDC
Modulator Out
...
œ √ Choose ENTER OK
†
Initial Setup
Change
Exit
SETUP
OK Cancel
OK
ENTER
Off
Off
SETUP Exit
On
Off
SETUP Exit
25