Timer Recording - Daewoo DVR-S05 User Manual

Timer Recording

Timer Recording
The Timer Recording function allows you to record up to 8 programs within a period of one month.
1
Insert recordable media such as DVD+R ,DVD+RW, recordable VHS tape.
2
Press [TIMER].
The 'Timer Recording' menu appears.
Use [...†] to move to a timer recording slot, and press [ENTER] to modify it.
If you did not set the clock on the DVD Recorder+VCR, you must do so before
programming a timer recording.
• Media - Choose desired media (DVD or VHS) using [...†].
• Ch. – Choose the desired channel, or one of the external inputs from which
to record.
• Date – Choose a date up to 1 month in advance, or select a daily or weekly
program.
• Start Time – Set the recording start time.
• End Time – Set the recording end time.
• Mode – Choose a Record mode.
DVD: HQ, SP, SLP or EP
VCR: SP, SLP
3
Enter the necessary information for your Timer Recording(s).
• œ √ – Moves the cursor left/right.
• ...† – Changes the setting at the current cursor position.
• Press [SETUP] to exit the Timer Record menu.
• Press [ENTER] after filling in all the program information.
• Press [TIMER] to display the Timer Record List.
4
Press [ENTER] to save the program.
The Timer Record List will appear.
5
Press [SETUP] to exit the Timer Record List.
6
Timer indicator will light or blinking. Power Off the DVD Recorder+VCR to start
the Timer Recording.
Note
• The Timer indicator lights on the front panel display when the DVD Recorder+VCR is ready for the Timer
Recording.
• The tape timer indicator is blinking if any of the following meets if no recordable tape is inserted.
Both the disc and tape timer indicators are blinking if tape and disc timer recordings are overlapped.
• The DVD Recorder+VCR will record the audio according to the current TV tuner setting (Stereo, Mono or SAP). Use
the [AUDIO] button to set the audio before switching the DVD Recorder+VCR to Standby mode.
• The DVD Recorder+VCR will automatically power off when the Timer Recording ends.
• There is a short delay when a timer recording finishes to confirm the recorded program. If two timer recordings
are set to record sequentially (one right after the other), the very beginning of the later program may not be
recorded.
42
Canceling a Timer Recording
You can clear a Timer Recording any time before the recording actually starts.
Timer Recording
• Use [...†] to select the program you want to erase on the Timer Recorder List, then press [ENTER] to
CH No. Date Start End Mode
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
Stopping a Timer Recording in Progress
---- --/-- --:-- --:-- ---
Instructions
Enter-Edit Setup-Exit Move ...† After a Timer Recording has started, you can still cancel the program by pressing and holding [STOP] for 3
seconds.
Edit Timer
Media
CH No. CH-03
Date Jan/02 Sun Timer Recording Troubleshooting
Start 01:36 AM
End 02:36 AM
Even if a Timer Recording is set, the DVD Recorder+VCR will not record if:
Mode HQ
Repeat Once
• No disc is loaded.
Delete
• A non-recordable disc is loaded.
Instructions
• DISC Lock is set to ON in the DISC Settings menu; see page 46.
Enter-Save Setup-Exit
• There are already 49 titles recorded on the disc.
Timer Recording You cannot enter a Timer Recording if:
CH No. Date Start End Mode
• A recording is already under way.
CH03 01/0201:36AM02:36AM HQ
---- --/-- --:-- --:-- --- • The start time has already passed.
---- --/-- --:-- --:-- ---
• Eight Timer Recordings have already been set.
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
If two or more Timer Recordings overlap:
---- --/-- --:-- --:-- ---
---- --/-- --:-- --:-- ---
• The earlier program takes priority.
---- --/-- --:-- --:-- ---
• When the earlier program finishes, the later program starts.
Instructions
Enter-Edit Setup-Exit Move ...†
• If two programs are set to start at exactly the same time, the program entered first takes priority.
Confirmation is not possible when:
• The DISC Protect setting is set to ON.
• There are already 49 titles recorded on the disc.
If the disc is damaged, the recording may not complete successfully, even if the Check field shows 'Rec. OK'.
modify it. Use [...†] to select 'Delete' then press [ENTER].
Recording Priority
• Timer Recording and OTR (One Touch Record) have the same priority but they have lower priority than manual
recording. During manual recording Timer Recording or OTR will be ignored.
Timer Recording
43