Recording Options Settings - Daewoo DVR-S05 User Manual

Auto Channel Search
The DVD Recorder+VCR has a frequency synthesized tuner capable of receiving
up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and
CATV channels 1-125.
Preparation:
Connect the DVD Recorder+VCR to the desired type of antenna or cable TV
system, as shown in 'Connecting Antenna/Cable' on page 11.
1
Follow steps 1-2 as shown under Tuning Band.
2
While 'Installation' is selected, press [.../†] to select 'Auto Channel
Search'.
3
Press [ENTER] to begin the channel search.
The tuner will automatically search for all available channels in your area
and place them in the tuner's memory.
• After Auto Channel Search is complete, follow the instructions above to make
sure that Tuning Band is set correctly (TV or CATV).
Add/Remove Channels
This feature allows you to manually add or delete channels from your
channel list.
1
Follow steps 1-2 as shown under Tuning Band.
2
Use [.../†] to select 'Add/Remove Channels'.
3
Press [ENTER]. The Channel Edit menu appears.
4
Use [.../†] to select a channel then toggle the add/delete selection
by pressing [ENTER].
5
Press [SETUP] to exit the Channel Edit menu.
Modulator Out
This feature allows you to set the RF Output channel to your TV
(you only need to set this if you are using the RF Out connection
to your TV).
1
Follow steps 1-2 as shown under Tuning Band.
2
Use [.../†] to select 'Modulator Out'.
3
Press [ENTER] to move to the second level.
4
Use [.../†] to set the Modulator Out channel to 'CH3' or
'CH4'.
5
Press [ENTER] to confirm.
18
Initial Setup
Installation
TV/CATV CATV
Auto Channel Search
Add/Remove Channels
Modulator Out CH3
Set Clock
Instructions
Enter-Confirm Setup-Exit
Move ...†
Installation
Searching for available TV stations:
5 channels found
Please wait...
Instructions
Setup-Exit
Installation
TV/CATV CATV
Auto Channel Search
Add/Remove Channels
...
Modulator Out CH3
Channel 0 0 1
Set Clock †
Enter-Add/Remove Setup-Exit
Instructions
Change Channel ...†
Enter-Confirm Setup-Exit
Move ...†
Installation
TV/CATV CATV
Auto Channel Search
Add/Remove Channels
Modulator Out CH3
Select Output
Set Clock
Channel
CH3
Instructions
Enter-Confirm Setup-Exit CH4
Move ...†
Set Clock
1
Follow steps 1-2 as shown under Tuning Band.
2
Use [.../†] to select 'Set Clock'.
3
Press [ENTER]. The Set Clock menu appears.
4
Enter the date and time.
œ /√ (left/right): Moves the cursor to the previous or next column.
.../† (up/down): Changes the setting at the current cursor position.
5
Press [ENTER] to confirm your setting, then press [SETUP] to exit the Setup
menu.

RECORDING OPTIONS Settings

DVD Record Quality
You can set the default DVD recording quality to: HQ (High
Quality - 1 hr/disc), SP (Standard Quality - 2 hrs/disc), EP
(Average Quality - 4 hrs/disc), or SLP (Low Quality - 6 hrs/disc).
1
Press [SETUP].
The Setup menu appears.
2
Use [œ/√] to select 'Recording Options'.
3
While 'Recording Options' is selected, press [†] to select
'DVD Record Quality'.
4
Press [ENTER] to move to the second level.
5
Use [.../†] to to select the desired Record Quality (HQ, SP, EP, or SLP).
6
Press [ENTER] to confirm your selection, then press [SETUP] to exit the menu.
VCR Record Quality
You can set the default VCR recording quality to SP (Standard
Play) or SLP (Super Long Play). SP is higher quality, but SLP
provides 3 times the recording time; e.g., a 2 hour tape will
record for 6 hours in SLP mode.
Follow the same procedure as the DVD Record Quality.
Initial Setup
Installation
TV/CATV CATV
Auto Channel Search
Add/Remove Channels
Modulator Out CH3
Set Clock
Instructions
Enter-Confirm Setup-Exit
Move ...†
Set Clock
Please set the clock:
...
Time : 12 : 00 AM
†
Date : Jan / 01 / 2005 (SAT)
Instructions
Enter-Confirm Setup-Exit Move ...†
Recording Options
DVD Record Quality HQ
Select Record
VCR Record Quality SLP
Quality
Auto Chapter Off
SLP
EP
Instructions
SP
Enter-Confirm Setup-Exit
HQ
Move ...†
Recording Options
DVD Record Quality HQ
VCR Record Quality SLP
Select VCR
Auto Chapter Off
Quality
SLP
Instructions SP
Enter-Confirm Setup-Exit
Move ...†
19