Removing The Audio Board - NEC Versa M320 Disassembly Manual

Removing the Audio Board

To remove the Audio board, first remove the Top Cover (see
remove the FDD (see
1. Remove the screws on the Audio board and disconnect the speaker cable as shown in
Fig. 39 .
2. Carefully remove the audio front panel as shown in Fig. 40 and put it aside.
3. Lift up the audio board as shown in Fig. 41 and put it aside.
Removing the FDD) then perform the following steps:
Fig. 39 Audio Board screws and speakers connector
Fig. 40 Removing the audio front panel
NEC Versa M320 Disassembly Manual
Removing the Top Cover),
M2x4.5 Silver
Page 22