Removing The Optical Disk Drive - NEC Versa M320 Disassembly Manual

Removing the optical disk drive

To remove the ODD, first remove the keyboard (see
the following steps:
1. Remove the screws retaining the optical drive connector as shown in Fig. 11
2. Remove the optical drive out from the base unit as shown in Fig. 12
Fig. 10 Removing the keyboard flat cable
Fig. 11 Releasing the optical drive
Fig. 12 Removing the optical drive
NEC Versa M320 Disassembly Manual
Removing the Keyboard), then perform
M2.5x4 Silver
Page 9