Removing The Touch Pad - NEC Versa M320 Disassembly Manual

Fig. 35 Removing the top cover
Note: Remember to disconnect the touch pad cable before lifting up the top cover.

Removing the Touch Pad

To remove the touch pad, first remove the top cover (see Removing the Top Cover), then
perform the following steps:
1. On the other side of the top cover unscrew the screws on the Touch Pad assembly as
shown in Fig. 36 and remove the touch pad assembly from the palm rest.
A = M2x3 Black
B = M2x3.5 Silver
Fig. 36 Touch Pad Assembly
NEC Versa M320 Disassembly Manual
Page 20