Security - NetComm NF8AC User Manual

Security

Firewall
The NF8AC has a firewall function which helps to keep you secure while allowing you to configure rules allowing certain types of
data through.
To use the firewall feature, begin by clicking the Add Firewall button to create a firewall. Then click the Add Rule button to create a
rule for the firewall. Enter the rules that you require for the firewall and then click the Save&Apply button to commit the settings.
MAC Filtering
The NF8AC offers the ability to use MAC Address filtering on ATM PVCs. You can elect to block or allow connections based on
MAC Address criteria. The default policy is to allow connections which match the criteria.
Click Add to enter a new MAC Address filter.
1. Enter the Protocol type to which the filter should apply.
2. Enter the Source and Destination MAC Address
3. Enter the direction of the traffic to filter
4. Select the WAN interface to which the filter should apply.
Click Apply/Save to save the new MAC filtering configuration.
NetComm Wireless NF8AC User Guide
31
www.netcommwireless.com