Maintenance Instructions - NewAir AC-10000E Owner's Manual

MAINTENANCE INSTRUCTIONS

Always unplug the air conditioner from the power supply before cleaning.
To maximize the efficiency of the air conditioner, regularly clean the unit.
Cleaning the Housing
•
Use a soft, damp cloth to wipe the body clean.
•
Never use strong chemicals, gasoline, detergents, chemically-treated cloths, or any other
cleaning solutions to clean the air conditioner, as these can all potentially damage the unit's
housing.
Cleaning the Filters:
•
Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt from the filters
and then rinse them thoroughly under running water (no warmer than 104
•
Thoroughly dry the filters before replacing them back into the unit.
PLEAE NOTE:
Never operate the unit without the filters.
End of Season Storage
•
Completely drain any condensed water
from the unit.
•
Set the air conditioner on fan mode
(ventilation only) for a few hours to
thoroughly dry the inside of the unit.
•
Clean or change the filter.
•
Unplug and wrap the power cord around
the cord wrap as shown (fig. 21).
•
Place the unit back in its original carton
and store it in a clean, dry area.
12
o
F).
FIG.21