Assembly Instructions - NewAir AC-10100E Owner's Manual

ASSEMBLY INSTRUCTIONS

Before using your air conditioner, you will need to install the exhaust hose so
that the heat from the appliance is released into an open area.
To install the exhaust hose, feed the end of the hose through any available
window and secure it into place using the included adapter. Ensure the
distance between the unit and the window is at least 20 inches (50cm).
To seal the gap around the adapter, you may utilize the extendable slides
(supplied along with the appliance) as below:
USING THE EXTENDABLE SLIDES
1. Place the extendable slides in the window gap and adjust the length as you
need.
2. Feed exhaust hose through the slide and the window so that spacer is held
securely. This technique may also be used for sash windows.
Note: Take care to maintain protection against intruders
6
newair.com