Operating Instructions - NewAir NEC500SI00 Owner's Manual

OPERATING INSTRUCTIONS

SET UP
Carefully remove all packaging materials and retain for future storage/use.
Make sure there is no residual foam left in any of the components. No tools will
be required to assemble this evaporative cooler.
Place the cooler on a firm, level surface before proceeding. Before using the
evaporative cooler for the first time, we recommend cleaning the tank with a
solution of warm water and light detergent.
FILLING THE WATER TANK
1. Remove the water tank by turning the water tank knob counterclockwise 90
degrees.
2. Fill the tank with clean water. Pay attention to the water level indicator
located on the front of the cooler to avoid overfilling the tank. The
approximate tank size of the NEC500SI00 is 1.5 gallons (5.5 liters).
3. Replace the tank back onto the back of the unit. Turn the water tank knob
clockwise 90°. This locks the water tank back into place.
8
newair.com