Adding Ports To A Multilink Trunk; Multilink Trunk Statistics; Figure 45 Portmembers Dialog Box - Nortel BayStack 380-24F Reference

Adding ports to a MultiLink Trunk

To add ports to an existing MLT:
1
From the Device Manager menu bar, choose VLAN > MLT.
The MLT dialog box opens
2
Double-click the PortMembers field.
The PortMembers dialog box opens

Figure 45 PortMembers dialog box

3
Click the port numbers you want to add.
4
Click OK.
5
In the Enable column, select True to enable your selection.

MultiLink Trunk statistics

To view MLT interface statistics:
1 From the Device Manager menu bar, choose VLAN > MLT.
The MLT dialog box opens
2 Select an MLT row and then click Graph.
The Statistics, MLT window
displayed.
Reference for the BayStack 380-24F Gigabit Switch Management Software
Chapter 4 Setting up MultiLink Trunk ports 99
(Figure 44 on page 98).
(Figure 45).
(Figure 44 on page 98).
(Figure 46) opens with the Interface tab