Trap Receivers Tab; Figure 26 Trap Receivers Tab; Table 19 Snmp Tab Fields - Nortel BayStack 380-24F Reference

56 Chapter 2 Configuring and graphing the switch
Table 19

Table 19 SNMP tab fields

Field
LastUnauthenticatedIpAddress
LastUnauthenticatedCommunityString
TrpRcvrMaxEnt
TrpRcvrCurEnt
TrpRcvrNext

Trap Receivers tab

The Trap Receivers tab lists the devices that will receive SNMP traps from the
BayStack 380-24F switch.
To open the Trap Receivers tab:
1
Select the chassis.
2
From the shortcut menu, choose Edit > Chassis.
The Chassis dialog box opens
displayed.
3
Click the Trap Receivers tab.
The Trap Receivers tab opens

Figure 26 Trap Receivers tab

214393-A
describes the SNMP Info tab fields.
Description
The last IP address that was not authenticated
by the device.
The last community string that was not
authenticated by the device.
The maximum number of trap receiver entries.
The current number of trap receiver entries.
The next trap receiver entry to be created.
(Figure 22 on page 50) with the System tab
(Figure 26).