Call Park - Nortel Meridian SL-100 M3905 User Manual

If the transferred call is not
answered, your telephone rings:
2498
Trans

Call Park

Call Park allows a call to be held temporarily, then retrieved from any other DN.
You can park an incoming call, then page the called party. When you use Call Park
you do not tie up a line. Your office may have a System Park DN where most calls
get automatically parked.
To Park a call on your own DN:
Park
/
To Park a call on a DN other than
your own DN:
DirectPark
While on an active call
1. Press a DN Key. You connect back to
the original caller.
2. Press the Transfer
transfer (to a different DN), if desired.
Note: Check with your system administra-
tor about the length of your recall timer.
1. While on an active call, press the
Park Key.
The screen displays PARK on the first line.
On the next or bottom line, the screen
displays CALL PARKED.
This call is automatically parked into the
system.
1. Press the DirectPark
line/feature Key.
2. Dial the DN where you want the call
parked, or press the Octothorpe (#)
Key twice to park the call on the
System Park extension.
Key and repeat the
programmable
63