Oracle Application Server 10.1.3.4 User Manual page 38

Modeling Interactions for OracleAS Adapter for IMS/DB
Table 2–12 (Cont.) Data Source Advanced Configuration
Field
Syntax name
Default table owner
Read/Write information
Repository Directory
Repository directory
Repository name
Virtual View Policy
Generate sequential view
Generate virtual views
Include row number
column
2-24 Oracle Application Server Adapters for IMS/DB User's Guide
Description
A section name in the NAV.SYN file that describes SQL syntax
variations. The default syntax file contains the following
predefined sections:
OLESQL driver and the SQL Server 7 OLE DB provider
■
(SQLOLEDB):
syntaxName="OLESQL_SQLOLEDB"
OLESQL driver and JOLT:
■
syntaxName="OLESQL_JOLT"
Rdb driver and Rdb version:
■
syntaxName="RDBS_SYNTAX"
ODBC driver and EXCEL data:
■
syntaxName="excel_data"
ODBC driver and SQL/MX data:
■
syntaxName="SQLMX_SYNTAX"
ODBC driver and SYBASE SQL AnyWhere data:
■
syntaxName="SQLANYS_SYNTAX"
Oracle driver and Oracle case sensitive data:
■
syntaxName="ORACLE8_SYNTAX" or,
syntaxName="ORACLE_SYNTAX"
For case sensitive table and column names in Oracle, use
quotes (") to delimit the names. Specify the case sensitivity
precisely.
The name of the table owner that is used if an owner is not
indicated in the SQL
Select one of the following:
Updateable data: Select this if you want to be able to update
■
the data on the data source.
Read only data: Select this to allow users to only view the
■
data on the data source.
Enter the location for the data source repository.
Enter the name of a repository for a data source. The name is
defined as a data source in the binding configuration. It is
defined as the type Virtual and is used to store Oracle
Connect views and stored procedures for the data source, if
required instead of using the default SYS data.
Select this to map a non-relation file to a single table. This
parameter is valid only if you are using virtual array views.
Select this if you want to have an individual table created for
every array in the non-relational file. This parameter is valid
only if you are using virtual array views.
Select this to include a column that specifies the row number in
the virtual or sequential view. This parameter is valid only if you
are using virtual array views.