Oracle Application Server 10.1.3.4 User Manual page 20

Installing Oracle Connect on an IBM z/OS Series Platform
Table 2–6 Installation Prepare Job Prompts and Responses
Screen
DO YOU WANT TO USE SMS MANAGED
STORAGE FOR THIS INSTALLATION Y/N [N] :
ENTER THE STORCLASS FOR INSTALLATION
TEMP DATASETS [ ] :
ENTER THE UNIT NAME FOR INSTALLATION
TEMP DATASETS [3390] :
ENTER THE VOLUME NAME FOR
INSTALLATION TEMP DATASETS :
ENTER THE OUTPUT CLASS FOR
INSTALLATION OUTPUT [A] :
DO YOU WANT TO USE THE DEFAULT JOB
CARD Y/N [Y]
DO YOU WANT TO PERFORM A MANUAL
(M) OR AUTOMATIC (A) INSTALLATION [A] :
PLEASE REVIEW AND SUBMIT FOR
EXECUTION THE
HLQ.TRANSMIT.LIB(INSTJO)
The following libraries are generated:
nnn.BUILDKIT.LOAD
nnn.BUILDKIT.SRC
nnn.BUILDKIT.GENDEMO
Where nnn is the high-level qualifiers you assigned in step 1.
In the nnn.BUILDKIT.SRC library, execute the NAVINST member:
4.
ex NAVINST
Follow the instructions in the Response column in the following table for each
entry in the Screen column.
2-6 Oracle Application Server Adapters for IMS/DB User's Guide
Response
If you want to manage the storage using SMS, then answer
Y, otherwise answer N.
This prompt is displayed only if SMS is used to manage the
installation (you answered Y to the first prompt).
Enter the storage class.
If a storage class is not specified, then enter the unit name
for temporary datasets used during the installation
procedure.
This prompt is displayed only if SMS is not used to manage
the installation (you answered N to the first prompt).
The volume name for temporary datasets used during the
installation procedure.
Enter the output class only if you do not want the default
class used (the default is A)
A job card is displayed. If you want to use a replacement
card, then it must be entered as it will appear in the job. You
can enter up to six lines. Enter a blank card to end input.
If you do not enter a card, then the Oracle Connect default
card is used.
If you want to review the JCL used to install Oracle Connect,
before it is submitted, then respond M for a manual
installation.
This prompt is displayed only if a manual installation is
requested (you answered M to the previous prompt).