Configuring A Binding Environment - Oracle Application Server 10.1.3.4 User Manual

Configuring a Binding Environment

sub-tasks by specifying this parameter. If you set 10 servers and 10 prestarted
sub-tasks then 100 tasks are started (10 sub-tasks for each process).
Configuring a Binding Environment
Each binding configuration includes the following information:
Environment settings, which are used to configure the environment used by any of
■
the adapters defined in the binding.
Application adapters on the current computer.
■
To configure environment settings in Oracle Studio, perform the following steps:
From the Start menu, select Programs, Oracle, and then select Studio.
1.
In the Design perspective Configuration view, expand the Machine folder, then
2.
expand the machine where you want to configure the binding.
Expand the Bindings folder. The binding available on this computer are listed.
3.
Right-click NAV and select Open.
4.
In the Environment tab, edit the environment settings as needed. To edit an
5.
environment setting, expand the property category and click the value to edit.
The binding Environment tab is shown in the following figure:
Figure 8–2 The Binding Properties tab
The binding environment is divided into the following categories:
Debug
■
General
■
Language
■
8-6 Oracle Application Server Adapters for IMS/DB User's Guide