Post-Installation Instructions; Post-Installation Procedures - Oracle Application Server 10.1.3.4 User Manual

Installing Oracle Connect on an IBM z/OS Series Platform
Table 2–8 IMS/DB Adapter Installation Prompts and Responses
Screen
ENTER DBD LIBRARY NAME
ENTER PSB LIBRARY NAME
ENTER RES LIBRARY NAME
ENTER PROC LIBRARY NAME
ENTER PGM LIBRARY NAME
ENTER YOUR PSB NAME
YOUR DBDLIB IS:
YOUR PSBLIB IS:
YOUR RESLIB IS:
YOUR PROCLIB IS:
YOUR PGMCLIB IS:
YOUR PSBNAME IS:
PLEASE CONFIRM (YES/NO/QUIT) :YES: :
DO YOU WANT ORACLE CONNECT TO
WORK WITH IMS/DB UNDER CICS
ENTER THE CICS EXCI LOAD LIBRARY NAME
[CICSTS13.CICS.SDFHEXCI]:
PLEASE CONFIRM (YES/NO/QUIT) [YES]:
The installation is completed. All JCL jobs and REXX procedures are written to the
INSTROOT.USERLIB library. INSTROOT is the high-level qualifier for the installation.

Post-Installation Instructions

The following post-installation tasks must be done to work with Oracle Connect:

Post-Installation Procedures

■
Starting the Daemon
■
Setting Up Oracle Connect for Reentrancy
■
Post-Installation Procedures
Perform the following procedures after completing the installation to configure Oracle
Connect.
Allocate a dataset for INSTROOT.DEF.BRANDBIN, using 1 track and with
■
RECFM=VB and LRECL=256. The block size is 6233.
INSTROOT is the high-level qualifier where Oracle Connect is installed.
Using FTP, copy the BRANDBIN file, in binary mode, from the
Oracle Connect\IMSDB Legacy Adapter directory to the mainframe, to
INSTROOT.DEF.BRANDBIN.
Define the LOADAUT library as an APF-authorized library
■
2-8 Oracle Application Server Adapters for IMS/DB User's Guide
Response
Enter the IMS DBD Library name for IMS on your system
Enter the IMS PSB Library name for IMS on your system
Enter the IMS RES Library name for IMS on your system
Enter the IMS PROC Library name for IMS on your system
Enter the IMS PGM Library name for IMS on your system
Enter the name of the PSB file with the name of your IMS
database.
This is a summary of the IMS questions. Check the summary
to be sure all is correct. You can select:
Yes, to use the IMS database as configured
■
No, to not use the IMS database
■
Quit, to leave the CUST process
■
If you want Oracle Connect to work with IMS/DB under
CICS, then answer Y, otherwise answer N.
Enter the CICS EXCI load library name only if you do not
want the default
Confirm the entered details