Oracle Application Server 10.1.3.4 User Manual page 142

Control
Figure 8–3 The Control tab
The following table shows the paremters that can be set in the Control tab:
Table 8–8
Field
Daemon IP Address
Daemon port
Automatically
recover from failure
Maximum XML
request size
Default language
Maximum XML in
memory
C-2 Oracle Application Server Adapters for IMS/DB User's Guide
Daemon Control Tab Components
Description
Enter the IP address of the machine(s) where the daemon
is listening. If no IP address is entered, the daemon will
listen on all available IP addresses.
Enter the port where the daemon is listening. If no port is
entered, the daemon listens on all available ports.
The daemon restarts automatically if it fails for any reason
(any error that causes the daemon process to terminate,
such as network process lost or the CPU running the
daemon crashes and the backup daemon is defined on
another CPU). All available and unconnected servers are
terminated and any connected servers are marked and
terminated on release. Also the backup starts a backup for
itself. The backup appends a new log file to the log of the
original daemon, adding a line indicating that a backup
daemon was started.
The maximum number of bytes that the daemon handles
for an XML document.
The language that the daemon supports. This setting is
used when working with a client with a code page
different from the server code page.
The maximum amount of space reserved for the XML in
memory.