Oracle Application Server 10.1.3.4 User Manual page 149

Table 8–11 (Cont.) General Tab Components
Field Description
Workspace name The name used to identify the workspace.
Note: The default configuration includes the default
Navigator workspace. This workspace is automatically
used if a workspace is not specified as part of the
connection settings.
Description A description of the workspace.
Startup script The full path name of the script that starts the workspace
server processes. The script specified here must always
activate the nav_login procedure and then run the
server program (svc). If you do not specify the directory,
the startup procedure is taken from the directory where
the daemon resides. Oracle Connect includes a default
startup script, which it is recommended to use.
Server type This field is not applicable for use with OracleAS Adapters
for IMS/DB.
Workspace binding This field is not applicable for use with OracleAS Adapters
name for IMS/DB.
Timeout parameters The time the client waits for the workspace server to start.
If the workspace server does not start within this period,
then the client is notified that the server did not respond.
Specifying the timeout here overrides the default setting,
specified in the Control section.
See Also:
section.
Client idle timeout The maximum amount of time a workspace client can be
idle before the connection with the server is closed.
Connect timeout The time the client waits for a workspace server to start. If
the workspace server does not start within this period,
then the client is notified that the server did not respond.
Call timeout The timeout period for short calls for all daemons. The
definition of a short call is a call that should be completed
in a few seconds. For example, most calls to a database
such as DESCRIBE should be completed in a few seconds
as opposed to call like a GETROWS call, which can take a
long time. In heavily loaded or otherwise slow systems,
even short calls such as calls to open a file, may take a
significant amount of time. If a short call takes more than
the specified time to complete, then the connection is
stopped. The default value for this parameter is 60
seconds. Values of less than 60 seconds are considered to
be 60 seconds.
Specifying the timeout in a workspace overrides the value
set in this field for that workspace.
Logging and Trace
Options
Control for details about the Daemon Control
Advanced Tuning of the Daemon C-9
Workspaces