Oracle Application Server 10.1.3.4 User Manual page 21

Table 2–7 Installation Prompts and Responses
Screen
DO YOU WANT TO USE SMS MANAGED
STORAGE FOR THIS INSTALLATION Y/N [N] :
THE SOFTWARE WILL BE INSTALLED UNDER
THE HIGH LEVEL QUALIFIER THAT YOU
WILL CHOOSE.
ENTER THE HIGH LEVEL QUALIFIER
["QUALIFIER"] :
ENTER THE STORCLASS FOR TEMP DATASETS
['STORCLASS'] :
ENTER THE UNIT NAME FOR INSTALLATION
TEMP DATASETS [3390] :
ENTER THE VOLUME NAME FOR
INSTALLATION TEMP DATASETS :
PLEASE CONFIRM (YES/NO/QUIT) [YES] :
ENTER THE OUTPUT CLASS FOR
INSTALLATION OUTPUT [A] :
DO YOU WANT TO USE THE DEFAULT JOB
CARD Y/N [Y]
ADDING AND UPDATING ORACLE
CONNECT FOR IMS/DB CONFIGURATION ON
THIS MACHINE, FROM A REMOTE ORACLE
ADMINISTRATION CONSOLE, CAN ONLY BE
DONE BY SOMEONE DEFINED AS AN
ADMINISTRATOR FOR ORACLE CONNECT
ON THIS MACHINE.
ENTER A VALID USER NAME FOR AN
ORACLE CONNECT ADMINISTRATOR [ALL]:
DO YOU WANT TO PERFORM A MANUAL (M)
OR AUTOMATIC (A) INSTALLATION [A]:
PLEASE REVIEW AND SUBMIT FOR
EXECUTION THE DSN1 (INSTJBOR)
In the nnn.BUILDKIT.SRC library, execute the IMSDB member:
5.
ex IMSDB
Follow the instructions in the Response column in for each entry in the Screen
column.
Installing Oracle Connect on an IBM z/OS Series Platform
Response
If you want to manage the storage using SMS, then answer
Y, otherwise answer N.
The high-level qualifier for the installation (referred to as
INSTROOT throughout this guide).
You can use more than one high-level qualifier (such as
ACME.DEV.VA10). The total length must be less than or
equal to twenty characters. The qualifiers can be the same
as the ones used for the installation (step 1).
The words transmit and buildkit cannot be used as
high-level qualifiers.
This prompt is displayed only if SMS is used to manage the
installation (you answered Y to the first prompt).
Enter the storage class.
The unit name for temporary datasets used during the
installation procedure.
This prompt is displayed only if SMS is not used to manage
the installation (you answered N to the first prompt).
The volume name for temporary datasets used during the
installation procedure.
Confirm the entered details.
Enter the output class for Oracle Connect output. Assigning
a device which is set on HOLD prevents the loss of log
information when the Oracle Connect started tasks finish
(the default is A).
A job card is displayed. If you want to use a replacement
card, then it must be entered as it will appear in the job. You
can enter up to six lines. Enter a blank card to end input.
If you do not enter a card, then the Oracle Connect default
card is used.
To manage Oracle Connect on this computer from Oracle
Studio, you need to enter a user account of a user who will
have administrative authorization, or press Enter to enable
any user to administer Oracle Connect on this computer.
The administrative rights can be changed from within
Oracle Studio after the installation.
If you want to review the JCL used to install Oracle
Connect, before it is submitted, then respond M for a
manual installation.
This prompt is displayed only if a manual installation is
requested (you answered M to the previous prompt).
DSN1 is the dataset name where INSTJBOR is located.
Installing and Configuring the OracleAS Adapter for IMS/DB 2-7