Table of Contents
Advertisement
[DIAGNOSTIC] screen
Item
VERSION
Displays the version of all firmware in the camera.
The version of each firmware can be checked by opening a sub-screen.
(Sub-screen)
[CAM SOFT]
[SYSCON
SOFT]
[P2CS BL2-1]
[P2CS BL2-2]
[P2CS KR]
[P2CS AP]
[VUP]
[VUP FS]
[CAM FPGA]
[BE FPGA]
[PROXY SOFT] Proxy board software version display (OP1)
[PROXY FPGA] Proxy board FPGA configuration ROM (OP1)
[SDI IN FPGA]
OPTION STATUS
Indicates whether there is an optional board, and displays activated status of the
upgrade software key. The following items are displayed on the sub-screen.
[SDI IN
BOARD]
[PROXY
BOARD]
[PRODUCTION
PACK]
[NETWORK
FUNC.]
[UPLINK
DEVICE]
[PLAYLIST]
MODEL NAME
Displays the product name of the camera.
SERIAL NO.
Displays the serial number of the camera.
OPERATION
Displays the operation time of the camera.
Chapter 7 Menu Operations — Menu list
Description of settings
Camera microcomputer software
System control microcomputer software
P2 control microcomputer boot program 1
P2 control microcomputer boot program 2
P2 control microcomputer kernel
P2 control microcomputer application software
System software for updating all firmware of the camera
File system for updating the camera
Camera FPGA configuration ROM
BE FPGA configuration ROM
FPGA configuration ROM of the SDI signal input board (OP2)
--- (with board: [ACTIVE], without board: ---)
--- (with board: [ACTIVE], without board: ---)
Activate: [ACTIVE]
No: [----]
Activate: [ACTIVE]
No: [----]
Activate: [ACTIVE]
No: [----]
Activate: [ACTIVE]
No: [----]
– 133 –
Remark
Advertisement
Table of Contents
