Reset Button; Figure 100: Reset Button (Back Of Unit) - Raritan Dominion KX II Server KX2-432 User Manual

134 D KX II U G
OMINION SER UIDE
Mouse: Attach either a standard PS/2 mouse to the Mini-DIN6 (female) mouse port or a standard
USB mouse to one of the USB Type A (female) ports.

Reset Button

At the back of the Dominion KX II unit, there is a Reset button. It is recessed to prevent
accidental presses (you will need a pointed object to use this button).
Reset button

Figure 100: Reset Button (back of unit)

The actions that are performed when the reset button is pressed are defined in the graphical user
interface. Refer to Security Settings, Encryption & Share for more information.
Note: It is recommended that you save the audit log prior to performing a factory reset. The audit
log is deleted when a factory reset is performed and the reset event is not logged in the audit log.
For more information about saving the audit log, please refer to Audit Log.
To reset the unit:
1. Power off the Dominion KX II unit.
2. Use a pointed object to press and hold the reset button.
3. While continuing to hold the reset button, power the Dominion KX II unit back on.
4. Continue holding the reset button for 5-10 seconds. Once the unit has been reset; two short
beeps signal completion.